Smeg PV175CB Instrukcja Użytkownika

Contents25EN1 Instructions 261.1 General safety instructions 261.2 Manufacturer liability 271.3 Appliance purpose 271.4 Disposal 271.5 Identific

Cleaning and maintenance344 Cleaning and maintenance4.1 Instructions4.2 Cleaning the applianceTo keep the surfaces in good condition, they should be c

Cleaning and maintenance35ENCooking hob gridsRemove the grids and clean them with lukewarm water and non-abrasive detergent. Make sure to remove any e

Installation365 Installation5.1 Safety instructionsVeneers, adhesives or plastic coatings on adjacent furniture should be temperature-resistant (>9

Installation37EN5.3 MountingOver built-in ovenThe distance between the hob and the kitchen furniture or other installed appliances must be enough to e

Installation38Hob sealTo prevent leakage of liquid between the frame of the hob and the work surface, place the adhesive seal provided along the entir

Installation39ENCarefully screw the connector 3 to the gas connector 1 of the appliance, placing the seal 2 between them.Connection with a flexible st

Installation40Extraction of the combustion productsThe combustion products may be extracted by means of hoods connected to a natural draught chimney w

Installation41ENRemoving the hob top1. Remove the grids from the hob.2. Remove the flame-spreader crowns and relative burner caps.3. Pull the knobs up

Installation42Replacing nozzles1. Unscrew screw A and push air regulator B as far as it will go.2. Use a spanner to remove the nozzles C and install t

Installation43ENAdjusting the minimum setting for LPGTighten the screw located at the side of the tap rod clockwise all the way.Lubricating the gas ta

Instructions261 Instructions1.1 General safety instructionsRisk of personal injury• During use the appliance and its accessible parts become very hot

Installation44Gas types and Countries NoGas types IT GB-IE FR-BE DE AT NL ES PT SE RU DK1 Natural Gas G20G20 20 mbar•• •• •••••G20/25 20/25 mbar•2 Na

Installation45ENBurner and nozzle characteristics tablesNozzles which are not provided are available at Authorised Service Centres.1Natural Gas G20 AU

Installation465.7 Electrical connectionGeneral informationCheck the grid characteristics against the data indicated on the plate.The identification pl

Instructions27EN1.2 Manufacturer liabilityThe manufacturer declines all liability for damage to persons or property caused by:• use of the appliance

Instructions281.5 Identification plateThe identification plate bears the technical data, serial number and brand name of the appliance. Do not remove

Description29EN2 Description2.1 General Description60 cm70 cmAUX = AuxiliarySR = Semi-rapidRR = Reduced rapidR1= Large rapidR2 = Medium rapid

Description302.2 SymbolsCooking zones Front left Rear left Central Rear right Front right Centre leftBurner knobsUseful for lighting and adjusting the

Use31EN3 Use3.1 Instructions3.2 First use1. Remove any protective film from the outside or inside of the appliance, including accessories.2. Remove an

Use323.3 Using the hobAll the appliance's control and monitoring devices are located together on the front panel. The burner controlled by each k

Use33ENPractical tips for using the hobFor better burner efficiency and to minimise gas consumption, use pans with lids and of suitable size for the b